Search Results

Avionics & Pilot Supplies, Rotables & Parts, Used Equipment

AV-1-1030x1030_main.jpg

RAMI AV-1 Antenna

ANTENNA/VHF communications, base station, 118-137 MHz. For communicating with ground vehicles or aircraft, 3/8 diameter aluminum radials, 1 diameter aluminum tube radiator, and can withstand windspeeds of up to 100 mph.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
11-12500_main.jpg

RAMI AV-10 VHF Antenna

VHF Comm Rod Antenna

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-100-500x500_main.jpg

RAMI AV-100 ELT Antenna

This FAA/TSO antenna is intended for use with an ELT (Emergency Locator Transmitter) for general aviation.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-22 (1)_main.jpg

RAMI AV-11 TRANSPONDER ANTENNA

The AV-11 is a non-certified transponder antenna for experimental aircraft, similar to the TED 104-12 antenna.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-12-500x500_main.jpg

RAMI AV-12 / AV-12L VOR Antenna

The AV-12 is a VOR receive only antenna which uses a highly efficient technique of molding the elements directly into a high-impact thermo-setting bakelite center insulator. The AV-12L includes all of the same features as the AV-12 and a 25 ft cable with integral balun.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-14-500x500_main.jpg

RAMI AV-14 VHF/FM COM Antenna

The AV-14 is similar to the AV-10 using the same 4-bolt mounting base except it has a shorter radiating whip element. The antenna is designed to operate in the Public Service and Business Bands 138-174 MHz.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-15-500x500_main.jpg

RAMI AV-15 UHF COM Antenna

The AV-15 is used with aviation, land mobile radio and flight phone bands.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-17-500x500_main.jpg

RAMI AV-17 VHF COM Antenna

The AV-17 is designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-200-500x500_main.jpg

RAMI AV-200 ELT Antenna

The AV-200 ELT antenna is: Whip type, 121.5 and 406 MHz and intended for use with an ELT (Emergency Locator Transmitter) for General Aviation. It is a passive two frequency wire whip, designed for low speed aircraft (up to 250 knots).

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-21-500x500_main.jpg

RAMI AV-21 Navigation Antenna

The AV-21 is a broadband radio telephone antenna that uses a BNC connector and allows for a smaller mounting hole. It is designed to operate at speeds up to 350 mph and altitudes up to 50,000 feet.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-22-500x500_main.jpg

RAMI AV-22 Transponder Antenna

The AV-22 is a transponder antenna which utilizes a "BNC" connector that allows for a smaller mounting hole.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-3-500x500_main.jpg

RAMI AV-3 Antenna

The AV-3 is a low profile snap-in mounting quarterwave antenna for use on surface vehicles. It has a solderless cable connection at the antenna and is supplied with 12 feet of cable and PL-529 connector.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-300-500x500_main.jpg

RAMI AV-300 ELT Antenna

The AV-300 ELT antenna is intended for use with an ELT (Emergency Locator Transmitter) for General Aviation. It is a passive three frequency fiberglass rod whip antenna, designed for low speed aircraft (up to 350 knots).

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-401-500x500_main.jpg

RAMI AV-401 ELT Antenna

The AV-401 is a passive, three-frequency fiberglass rod whip antenna for use with general aviation ELTs. This antenna is designed for use on low-speed aircraft flying at speeds up to 350 knots.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-402-500x500_main.jpg

RAMI AV-402 ELT Antenna

RAMI rod/whip type antenna is intended for use with an ELT (Emergency Locator Transmitter) for general aviation. It is a passive three frequency fiberglass rod whip antenna, designed for low speed aircraft (up to 350 knots).

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-5-500x500_main.jpg

RAMI AV-5 Antenna

The AV-5 is an economical Ground Plane base station antenna. It is ideally suited for use with Unicom transceivers and is field tunable to optimize VSWR at desired frequency.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-520-500x500_main.jpg

RAMI AV-520 VOR/LOC/GS Antenna

ā€œVā€ Dipole VOR/LOC/GS antenna with detachable elements mounts on top of vertical stabilizer for most single engine general aviation aircraft.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-525-500x500_main.jpg

RAMI AV-525 VOR/LOC/GS Antenna

The AV-525 FAA/TSO is a VOR/LOC/GS antenna similar in style to the AV-12 but utilizes an internal balun transformer. The antenna is rated at speeds up to 350 mph and altitudes up to 50,000 feet. It is a direct replacement for the CI 157P.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-529-500x500_main.jpg

RAMI AV-529 COM Antenna

The AV-529 is designed for broadband communications (118-136 MHz). It has a die-cast aluminum base and a uniquely designed radiator encapsulated in a fiberglass whip.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-530-500x500_main.jpg

RAMI AV-530 COM Antenna

The AV-530 is designed for broadband communications. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-532-500x500_main.jpg

RAMI AV-532 Antenna

The AV-532 is a VOR receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-532L-500x500_main.jpg

RAMI AV-532L VOR/LOC/GS Antenna

The AV-532 is a VOP receive only antenna which consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-534-500x500_main.jpg

RAMI AV-534 Antenna

The AV-534 is a heavy-duty stainless steel quarterwave VHF communications antenna.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-534L-500x500_main.jpg

RAMI AV-534L Antenna

The AV-534 (with 96 inch cable) is a heavy-duty stainless steel quarterwave VHF communications antenna.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request
AV-547-500x500_main.jpg

RAMI AV-547 Coupler

The AV-547 coupler feeds two navigation receivers from one antenna.

Manufacturer: RAMI / R.A. Miller Industries
Call/Request

Copyright © Gardner Lowe Aviation Services